一台openbsd5.0做服务器，下面多台无盘工作站，可以启动到openbsd桌面，并且可以运行
firefox,wordpress等，可不可能做出来？
openbsd无盘工作站
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
leo你真不简单，我想到的竞然有人已经做成功了~~~~山外青山楼外楼，天外更有天外人
这个好好学习学习
这个好好学习学习
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
说句实在话，看这个说明真的做不出来；我认为如果把用openbsd5.0做无盘服务器来，还有有意义的……
说明一下：openbsd5.0 里面 # /etc/rc.conf 里面没有nfs_server="YES"
这个选项；是不是只需 nfsd_flags="-tun 4" 就可以了？
/export/diskless/root 这个目录在 / 根目录下，而这个目录只有 200Ｍ，我把它做到
/home/diskless/root 目录下，把其中的 /export 目录换成 /home 不知行不行？
回复: openbsd无盘工作站
junfengfan 写了:一台openbsd5.0做服务器，下面多台无盘工作站，可以启动到openbsd桌面，并且可以运行
firefox,wordpress等，可不可能做出来？
man diskless
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
无盘工作站做成了，login: 不知该输入什么用户名或密码；输入root 不行，在openbsd服务器上面新建的用户也不行，openbsd无盘工作站如何建立新用户呢？
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
请leo老师做一下这个openbsd5.0 diskless install，实际我做了其实也不算难，但最后不知道无盘工作站如何输入用户名，真的非常谢谢
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
内核需要重新编译一下junfengfan 写了:说句实在话，看这个说明真的做不出来；我认为如果把用openbsd5.0做无盘服务器来，还有有意义的……
说明一下：openbsd5.0 里面 # /etc/rc.conf 里面没有nfs_server="YES"
这个选项；是不是只需 nfsd_flags="-tun 4" 就可以了？
/export/diskless/root 这个目录在 / 根目录下，而这个目录只有 200Ｍ，我把它做到
/home/diskless/root 目录下，把其中的 /export 目录换成 /home 不知行不行？
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
缺少 内核需要重新编译 这一步
回复: openbsd无盘工作站
你不是已经做出来了吗？我是没有什么兴趣，还是你自己从头至尾摸索出来的，自己写一个完整的教程吧，这样更有意义。
回复: openbsd无盘工作站
本文档摘录修订自man diskless，未实操验证，备用，改天再试
假设client网卡物理地址是00:02:56:00:73:31，网卡型号是fxp0，准备分配的ip地址是10.0.0.123
服务器的ip地址是10.0.0.1
1. Add an entry to /etc/ethers corresponding to the client's Ethernet
address:
00:02:56:00:73:31 myclient
2. Assign an IP address for myclient in /etc/hosts:
10.0.0.123 myclient
3. ensure that /etc/inetd.conf is
configured to run tftpd(8) in the directory /tftpboot.
/export/myclient/root目录下面先放2个文件pxeboot和bsd（bsd.sp或bsd.mp改名后的文件）
tftp dgram udp wait root /usr/libexec/tftpd tftpd -s /export/myclient/root
4. An example entry in
dhcpd.conf(5):
subnet 10.0.0.0 netmask 255.255.255.0 {
host myclient {
filename "pxeboot";
option root-path "/export/myclient/root"; #第3步骤已经设置，这里可以省略
hardware ethernet 00:02:56:00:73:31;
fixed-address 10.0.0.123;
}
}
Note that procedures for AMD64 and i386 clients vary somewhat. See
pxeboot(8) for more detailed information.
5. Add myclient to the bootparams database /etc/:
myclient root=server:/export/myclient/root \
swap=server:/export/myclient/swap
Note that some bootparam servers are somewhat sensitive. Some
require fully qualified hostnames or partially qualified hostnames
(which can be solved by having both fully and partially qualified
entries). Other servers are case sensitive.
6. Build the swap file for myclient:
# mkdir -p /export/myclient/root/swap
# cd /export/myclient
# dd if=/dev/zero of=swap bs=1m count=120
This creates a 120 Megabyte swap file and an empty /swap directory.
A smaller swap file may be created if the boot is for maintenance
(i.e. temporary) purposes only.
7. Populate myclient's root filesystem on the server. How this is done
depends on the client architecture and the version of the OpenBSD
distribution. It can be as simple as copying and modifying the
server's root filesystem, or perhaps the files can be taken from the
standard binary distribution.
8. Export the required filesystems in /etc/exports:
/usr -ro myclient
/export/myclient -maproot=root -alldirs myclient
限制局域网访问的例子如下
#
# NFS exports Database
# See exports(5) for more information. Be very careful, misconfiguration
# of this file can result in your filesystems being readable by the world.
/work -alldirs -ro -network=10.0.0 -mask=255.255.255.0
--------------------------------------------------------
If the server and client are of the same architecture, then the
client can share the server's /usr filesystem (as is done above).
If not, a properly fleshed out /usr partition will have to be built
for the client in some other place.
9. Copy and customize at least the following files in
/export/myclient/root:
# cd /export/myclient/root/etc
# cp /etc/fstab fstab
# cp /etc/hosts hosts
# echo myclient > myname
# echo inet 10.0.0.123 > hostname.fxp0
Note that "fxp0" above should be replaced with the name of the
network interface that the client will use for booting.
10. Correct at least the critical mount points in the client's fstab(5)
(which will be /export/myclient/root/etc/fstab):
10.0.0.1:/export/myclient/root / nfs rw 0 0
10.0.0.1:/export/myclient/swap none swap sw,nfsmntpt=/swap
10.0.0.1:/usr /usr nfs ro 0 0
10.0.0.1:/export/myclient/root/var /var nfs rw,nosuid,nodev 0 0
The above example works even if /usr and /var are not on separate
partitions. It allows them to be mounted with NFSv3, if the server
allows it, and to specify per-partition mount options, such as
``nodev''.
11. Make sure the correct processes are enabled on the server. See
rc.conf(8) for details of how to start these processes at boot.
mountd(8), nfsd(8), portmap(8), and rarpd(8).
tftpd(8) via inetd(8) dhcpd(8)
12. Net boot the client.
nfs(nfsd(8), portmap(8))参考以下文档配置
http://www.openbsd.org/faq/faq6.html#NFS
以上文档clinet启动之后无法login？
添加用户方法如下？
# chroot /export/myclient/root
# passwd root
Changing local password for root.
New password:
Retype new password:
# exit
假设client网卡物理地址是00:02:56:00:73:31，网卡型号是fxp0，准备分配的ip地址是10.0.0.123
服务器的ip地址是10.0.0.1
1. Add an entry to /etc/ethers corresponding to the client's Ethernet
address:
00:02:56:00:73:31 myclient
2. Assign an IP address for myclient in /etc/hosts:
10.0.0.123 myclient
3. ensure that /etc/inetd.conf is
configured to run tftpd(8) in the directory /tftpboot.
/export/myclient/root目录下面先放2个文件pxeboot和bsd（bsd.sp或bsd.mp改名后的文件）
tftp dgram udp wait root /usr/libexec/tftpd tftpd -s /export/myclient/root
4. An example entry in
dhcpd.conf(5):
subnet 10.0.0.0 netmask 255.255.255.0 {
host myclient {
filename "pxeboot";
option root-path "/export/myclient/root"; #第3步骤已经设置，这里可以省略
hardware ethernet 00:02:56:00:73:31;
fixed-address 10.0.0.123;
}
}
Note that procedures for AMD64 and i386 clients vary somewhat. See
pxeboot(8) for more detailed information.
5. Add myclient to the bootparams database /etc/:
myclient root=server:/export/myclient/root \
swap=server:/export/myclient/swap
Note that some bootparam servers are somewhat sensitive. Some
require fully qualified hostnames or partially qualified hostnames
(which can be solved by having both fully and partially qualified
entries). Other servers are case sensitive.
6. Build the swap file for myclient:
# mkdir -p /export/myclient/root/swap
# cd /export/myclient
# dd if=/dev/zero of=swap bs=1m count=120
This creates a 120 Megabyte swap file and an empty /swap directory.
A smaller swap file may be created if the boot is for maintenance
(i.e. temporary) purposes only.
7. Populate myclient's root filesystem on the server. How this is done
depends on the client architecture and the version of the OpenBSD
distribution. It can be as simple as copying and modifying the
server's root filesystem, or perhaps the files can be taken from the
standard binary distribution.
8. Export the required filesystems in /etc/exports:
/usr -ro myclient
/export/myclient -maproot=root -alldirs myclient
限制局域网访问的例子如下
#
# NFS exports Database
# See exports(5) for more information. Be very careful, misconfiguration
# of this file can result in your filesystems being readable by the world.
/work -alldirs -ro -network=10.0.0 -mask=255.255.255.0
--------------------------------------------------------
If the server and client are of the same architecture, then the
client can share the server's /usr filesystem (as is done above).
If not, a properly fleshed out /usr partition will have to be built
for the client in some other place.
9. Copy and customize at least the following files in
/export/myclient/root:
# cd /export/myclient/root/etc
# cp /etc/fstab fstab
# cp /etc/hosts hosts
# echo myclient > myname
# echo inet 10.0.0.123 > hostname.fxp0
Note that "fxp0" above should be replaced with the name of the
network interface that the client will use for booting.
10. Correct at least the critical mount points in the client's fstab(5)
(which will be /export/myclient/root/etc/fstab):
10.0.0.1:/export/myclient/root / nfs rw 0 0
10.0.0.1:/export/myclient/swap none swap sw,nfsmntpt=/swap
10.0.0.1:/usr /usr nfs ro 0 0
10.0.0.1:/export/myclient/root/var /var nfs rw,nosuid,nodev 0 0
The above example works even if /usr and /var are not on separate
partitions. It allows them to be mounted with NFSv3, if the server
allows it, and to specify per-partition mount options, such as
``nodev''.
11. Make sure the correct processes are enabled on the server. See
rc.conf(8) for details of how to start these processes at boot.
mountd(8), nfsd(8), portmap(8), and rarpd(8).
tftpd(8) via inetd(8) dhcpd(8)
12. Net boot the client.
nfs(nfsd(8), portmap(8))参考以下文档配置
http://www.openbsd.org/faq/faq6.html#NFS
以上文档clinet启动之后无法login？
添加用户方法如下？
# chroot /export/myclient/root
# passwd root
Changing local password for root.
New password:
Retype new password:
# exit
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
添加用户方法如下？
# chroot /export/myclient/root
# passwd root
Changing local password for root.
New password:
Retype new password:
# exit
那也就是说，client用root登录？用你新改的密码，好像不行……
# chroot /export/myclient/root
# passwd root
Changing local password for root.
New password:
Retype new password:
# exit
那也就是说，client用root登录？用你新改的密码，好像不行……
-
junfengfan
- 铜 Cu
- 帖子: 236
- 注册时间: 2010-02-03 18:37
回复: openbsd无盘工作站
把这个教程写出来，必须的；可是我认为自己太急性子了，把结果做不出来，心中那个焦急；还是慢慢来，搞出来后，好好写一个教程……leo 写了:你不是已经做出来了吗？我是没有什么兴趣，还是你自己从头至尾摸索出来的，自己写一个完整的教程吧，这样更有意义。
在线用户
正浏览此版面之用户: Ahrefs [Bot], Semrush [Bot] 和 0 访客